A room accommodating up to 18 people, a large sized conferencing room is a reserved, enclosed space. This setup is designed so that the camera will capture the faces and the microphone will pick up the voices off all the participants in a space as large as 4.5×8.5 meters. Large meeting rooms usually involve a long conferencing table for meeting participants to sit around with a display for meeting content setup at one end of the room.
Meeting participants sit around a table where three microphones are distributed, so that they can pick up voices of participants sitting within a range of 2.3 meters.
Loudspeakers are mounted to the wall or at the edge of a room and near the camera and display so that meeting audio projects to all listeners at up to a range of 7.5 meters.
A camera is mounted at the edge of the room near a display. It is located within a range of approximately between 1 and 7.4 meters of meeting participants. It is designed so that it will capture those within a horizontal field of view of at least 70º.
Save time, money, and other resources, and be ready to install a system on arrival at your door. Ready to go Teams Rooms are specifically designed to be complete for a specific environment tailored for room variation by including cables of the appropriate length, cable management, and other ancillary parts. This means you get up and running quicker with less hassle. This cable layout details all the included the cables, connections, and paths necessary to connect all the components of together. The detail does not show the cable lengths to scale.
Included
Logitech Tap
Intel NUC
Logitech Rally Plus
Logitech Rally Mic Pod
Logitech Rally Hub
(2) HDMI cables
(2) Ethernet cables
USB-C to HDMI cable
Dongle adapter ring
Logitech Tap mount
Logitech NUC mount
Logitech Rally mounting kit
(2) Ethernet cables
Zip ties, screws, and cable management parts
Position
Tabletop is standard. Additional mounting options are available for table, riser, and wall
Connectivity
USB-C on Console to USB-A on the computer side
Maximum consoles
1
Screen Resolution (pixels)
1280 x 800
Resolution
WXGA
Aspect ratio
8:5
Screen size diagonal
10.1 Inch
Dimensions
2.3 in (58mm) x 9.6 in (244 mm) x 7.0 in (179 mm)
Security
Two Kensington lock slots, 100mm x 100mm VESA FDMI (flat display mounting interface), additional mounting options are available for table, riser, and wall
Position
Tabletop, wall or bottom or side of the display using the mounting kit included in the bundle
Speakers
1
Max extra speakers
2
Output in watts
10 Per channel
Output in DB
95dB SPL @1W, 100dB SPL @7.5W, both +/-2dB at ½ meter
Stereo support
Yes (for playing local audio only)
Special features
High-performance 3inch (76mm) driver with rare-earth magnet. Patent-pending suspension system eliminates vibration-induced camera shake and audio interference. Single Mini XLR cable connection for both signal and power. Sensitivity: 95+/-2dB SPL at ½ meter. Distortion: 200Hz–300Hz < 2.5%, 300Hz–10kHz < 1%@7.5W. Speaker sampling rate: 48 kHz
Pickup radius
4.5 Meters (15 feet)
Microphones
Three mic pods included, each with four omnidirectional microphones forming eight acoustic beams. Includes acoustic echo cancellation, voice activity detector, and background noise suppression
Max microphones
7 Mic pods
Microphone placement
Tabletop
Microsoft Teams Streaming
1080p (camera supports up to 4K at 30 fps)
Horizontal field of view
82.1°
Vertical field of view
52.2°
Diagonal field of view
90°
Zoom
15x HD optical and digital zoom
Pan/tilt
Yes
Pan/ tilt angle
±90° Pan +50°/-90° tilt
Mount options
Tabletop and wall through included tripod thread or included mounting kit
Included mount
Mounting kit for the camera and hubs
Cable type
USB 3.1 Type C to USB Type C 3.1
Maximum cable length
Rally Display Hub to Table Hub connect via CAT6A Ethernet cable that can be extended up to 164 feet (50 meters)
Included cable length
6.5 Feet (2 meters)
Separate power adapter?
Yes (included)
Reviews
There are no reviews yet.